Waterproofing Emulsion 0.5 L

Waterproofing emulsion for cotton and cotton/polyester fabrics. The treated fabric is waterproofed again.

Application: clean and dry the fabric with fresh water before waterproofing.

Waterproofing: dilute 500 ml of waterproofing emulsion in 10 l of water. Move the dry fabric in the solution for around 10-20 minutes. Hang up to dry without rinsing. Iron the slightly damp fabric and leave to dry completely. If you cannot fully immerse the material (e.g. for finished tents), spray or apply the solution using a sponge. White marks or discolouration may occur in the event of overdosing.
0.5 l is sufficient for an area of approx. 15 m2.

Contains modified aminoalkyl polysiloxane, glycolic acids.
Contains amino-modified siloxane, glycollic acid.

Danger: causes serious eye damage. May cause skin irritation. If medical advice is needed, have container or label at hand. Keep out of the reach of children. Wear protective gloves/eye protection/face mask. IF PRODUCT COMES INTO CONTACT WITH EYES: gently rinse for several minutes with water. Remove contact lenses as soon as possible, if applicable. Continue rinsing. Contact the TOXIC SUBSTANCE INFORMATION CENTRE/a doctor immediately. IF PRODUCT COMES INTO CONTACT WITH SKIN: rinse with plenty of water.